SKU	Info/Size
THD37218RH	Size (in.): 3/8 x 2-1/8, Accepts Rod Dia. (in.): 3/8, Drill Bit Dia. (in.): 1/4, Wrench Size (in.): 1/2, Min. Embed. (in.): 2-1/8, Box Qty.: 50, Carton Qty.: 250

Quick Overview

Features:

Suspends threaded rod from concrete slabs, concrete beams, or concrete over metal deck in order to hang pipes, cable trays and HVAC equipment
Tested to offer industry-leading performance in cracked and uncracked concrete – even in seismic loading conditions
High-load capacity as a result of the full-length threads that undercut the concrete and effectively transfer load into the base material
Specialized heat-treating process creates tip hardness to facilitate cutting while the body remains ductile
Serrated cutting teeth and patented thread design enable quick and easy installation
Low installation torque with no secondary setting
No special installation tools required. Holes can be drilled with a rotary hammer or hammer drill with standard ANSI-size bit
Anchors are installed with standard-size sockets
The THD50234RH and THD37212RH are code-listed for cracked and uncracked concrete applications under the 2012, 2009 and 2006 IBC/IRC per ICC-ES ESR-2713

Material:

Finish:

Codes:

(THD37212RH and THD50234RH)

(THD37218RH and THD50234RH)

(THD37212RH)

Interested in this item or want more information?
Call Mon. through Fri. 7:00 AM - 5:00 PM PST
Phone: (800) 310-6245
Email: dnatali@natco1.com

Can't find what you want? Give us a call and we can help you find it.

Details

Code-listed under the current IBC/IRC in accordance with AC193 for cracked concrete applications per ICC-ES ESR-2713

Code-listed under the current IBC/IRC in accordance with AC106 for masonry applications per ICC-ES ESR-1056

Serrated teeth on the tip of the Titen HD facilitate cutting and reduce installation torque.

Serrated teeth on the tip of the Titen HD screw facilitate cutting and reduce installation torque.

Thread design undercuts to efficiently transfer the load to the base material

Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility that helps prevent breakage

No special drill bit needed: Designed to install using standard sized ANSI tolerance drill bits

Installs with 50% less torque: Testing shows that when compared to competitors, the Titen HD requires 50% less torque to be installed in concrete.

Hex-washer head: Requires no separate washer and provides a clean installed appearance.*

Removable: Ideal for temporary anchoring (e.g. formwork, bracing) or applications where fixtures may need to be moved. Re-use of the anchor to achieve listed load values is not recommended.

*Some jurisdictions require an additional square plate washer for sill plate applications.

Additional Information

Manufacturer: Simpson Strong-Tie

For More Information on the Titen HD® Rod Hanger, [Click Here] to Link to Manufacturer Web Site

Search: